Tim's Technology Journey Wiki

• ⇒ printenv
• bootcmd=cp.b 0xbfe00000 0x100000 0x100000; bootelf 0x100000
• bootdelay=1
• baudrate=9600
• autoload=n
• loaddev=disk0:
• ipaddr=192.168.168.137
• gatewayip=192.168.168.1
• serverip=192.168.168.9
• netmask=255.255.255.0
• ethaddr=00:24:dc:18:01:00
• boot.devlist=nand-flash:usb
• reduce_dp_memory=0
• wmem_selector=4520
• boot.status=0x1
• boot.current=primary
• loadaddr=0x20000000
• numcores=2
• boot.ver=2.8
• boot.upgrade.loader=0xbfe00000
• boot.upgrade.uboot=0xbfc00000
• boot.btsq.start=0x003fa000
• boot.btsq.len=0x00002000
• boot.env.start=0x003fe000
• boot.env.size=0x00002000
• boot.upgrade.uboot.hdr=0x00000030
• boot.upgrade.uboot.data=0x00000100
• boot.upgrade.loader.hdr=0x002fffc0
• boot.upgrade.loader.data=0x00200000
• stdin=serial
• stdout=serial
• stderr=serial
• env_addr=0xbfffe000
• env_size=0x2000
• flash_base_addr=0xbfc00000
• flash_size=0x400000
• ethact=octeth0
• post.usb=PASSED
• post.eeprom=PASSED
• post.memory=PASSED
• post.uboot-crc=PASSED