Tim's Technology Journey Wiki

• root@% cli
  • root> request system zeroize

• root> edit
  • Entering configuration mode

[edit] root# delete This will delete the entire configuration Delete everything under this level? [yes,no] (no) yes

[edit] root#

• [edit]

root# set system host-name LabFW2

• [edit]

root# set system root-authentication plain-text-password New password: Retype new password:

• root# set system login user tim authentication plain-text-password

New password: Retype new password:

• [edit]

root# set system login user timm class super-user

• [edit]

root# rename system login user timm to user tim

• [edit]

root# set system login user tim full-name “Tim Panther”

• [edit]

root# set system host-name LLabFW22

[edit] root# delete system host-name LLabFW22

[edit] root# set system host-name LabFW2

• [edit]

root# show ## Last changed: 2016-09-26 02:10:34 UTC version 12.1×46-D40.2; system {

  host-name LabFW2;
  root-authentication {
      encrypted-password "$1$SVE6qJyk$yKV8ZoWhG40Sb/IS/va.60"; ## SECRET-DATA
  }
  login {
      user tim {
          full-name "Tim Panther";
          class super-user;
          authentication {
              encrypted-password "$1$b1ak3jfX$CC62JkTQSpT1KojlKTKYt."; ## SECRET-DATA
          }
      }
  }

}

• [edit]

root# show | display set set version 12.1×46-D40.2 set system host-name LabFW2 set system root-authentication encrypted-password “$1$SVE6qJyk$yKV8ZoWhG40Sb/IS/va.60” set system login user tim full-name “Tim Panther” set system login user tim class super-user set system login user tim authentication encrypted-password “$1$b1ak3jfX$CC62JkTQSpT1KojlKTKYt.”

• [edit]

root# commit check configuration check succeeds

[edit] root# commit comment “Initial setup for lab” commit complete

[edit] root@LabFW2# quit Exiting configuration mode

root@LabFW2> show system commit 0 2016-09-26 02:17:42 UTC by root via cli

  Initial setup for lab

1 2016-09-26 00:59:12 UTC by root via other

root@LabFW2>

• Juniper default passwords:
  • juniper1
  • juniper123
  • cisco

• [edit]

root@LabJR13# edit protocols bgp

[edit protocols bgp] root@LabJR13# top

[edit] root@LabJR13# edit protocols bgp

[edit protocols bgp] root@LabJR13# up

[edit protocols] root@LabJR13# up

[edit] root@LabJR13# edit protocols bgp

[edit protocols bgp] root@LabJR13# up 2

[edit] root@LabJR13#

• root@LabJR13> request system reboot

• root@LabFW1> request system power-off

• root@LabJR13> request system power-off message “Turning off in 10 hours”

This is needed to make the firewalls' interfaces into router interfaces.

• [edit]

root@LabFW1-J1# show | compare [edit]

security {
    forwarding-options {
        family {
            inet6 {
                mode packet-based;
            }
            mpls {
                mode packet-based;
            }
            iso {
                mode packet-based;
            }
        }
    }
}

Or you can type:

• set security forwarding-options family inet6 mode packet-based
• set security forwarding-options family mpls mode packet-based
• set security forwarding-options family iso mode packet-based

* [edit]
interfaces {
    ge-0/0/0 {
        unit 0 {
            family inet {
                address 192.168.12.1/24;
            }
        }
    }
    fe-0/0/2 {
        unit 0 {
            family inet {
                address 192.168.13.1/24;
            }
        }
    }
    fe-0/0/7 {
        unit 0 {
            family inet {
                address 192.168.14.1/24;
* or you can type:
  * set interfaces fe-0/0/7 unit 0 family inet address 192.168.14.1/24