=====OS Upgrade Log===== ## My log file for downgrading, then upgrading an EX4200. First, I was experiencing problems when I tried to upgrade the OS. As a last ditch effort, I used JWeb, and the upgrade was successful. Then I decided to format the flash and rebuild the Operating System from scratch. That process worked without any issues and took about two hours. ## Enjoy! mgd: Running FIPS Self-tests veriexec: no signatures for device. file='/sbin/kats/cannot-exec' fsid=89 fileid=51404 gen=1 uid=0 pid=562 mgd: FIPS Self-tests Skipped mgd: commit complete Setting initial options: debugger_on_panic=NO debugger_on_break=NO. Starting optional daemons: . Doing initial network setup: . Initial interface configuration: additional daemons:. Additional routing options:kern.module_path: /boot//kernel;Loading the CHMIC module Loading the EX-series platform NETPFE moduletype;/modules/ifpfe_drv;/modules/platform;/modules; kld netpfe drv: ifpfed_chmic ifpfed_ml_cmn ifpfed_svcskld platform: ex_ifpfe if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertycryptosoft0: on nexus0 pe_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_onIPsec: Initialized Security Association Processing. _ifup: 1 -> 1 ipsec kld kats kldkldload: can't load kats.ko: File exists . Doing additional network setup:. Starting final network daemons:. starting local daemons:set cores for group access . Boot media /dev/da0 has dual root support WARNING: JUNOS versions running on dual partitions are not same ** /dev/da0s2a FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 17579 free (11 frags, 2196 blocks, 0.0% fragmentation) setting ldconfig path: /usr/lib /opt/lib starting standard daemons: cron. Local package initialization:. Initialize /var subdirs Tue Sep 11 06:27:15 UTC 2018 Amnesiac (ttyu0) login: root root@:RE:0% shutdown -r now Shutdown NOW! shutdown: [pid 1432]uilt 2018-09-11 05:42:39 UTC root@:RE:0% *** FINAL System shutdown message from root@ *** System going down IMMEDIATELY SSWaiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...11 4 4 2 2 1 1 0 0 0 0 0 done syncing disks... All buffers synced. Uptime: 7m53s recorded reboot as normal shutdown Rebooting... U-Boot 1.1.6 (Jul 5 2012 - 11:58:22) Board: EX4200-24T 2.2 EPLD: Version 6.0 (0x85) DRAM: Initializing (1024 MB) FLASH: 8 MB Firmware Version: --- 01.00.00 --- USB: scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 2 Storage Device(s) found ELF file is 32 bit Consoles: U-Boot console FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4 (builder@greteth, Thu Jul 5 11:29:34 UTC 2012) Memory: 1024MB bootsequencing is enabled bootsuccess is set new boot device = disk0s1: Loading /boot/defaults/loader.conf /kernel data=0xb71e7c+0xd12b0 syms=[0x4+0x9dce0+0x4+0xec41d] Hit [Enter] to boot immediately, or space bar for command prompt. Type '?' for a list of commands, 'help' for more detailed help. loader> set ipaddr=192.168.1.56 loader> set netmask=255.255.255.0 loader> set gateway=192.168.1.254 loader> set serverip=192.168.1.204 loader> install --format tftp://192.168.1.204/jinstall-ex-4200-14.1X53-D52.4-domestic-signed.tgz Speed: 1000, full duplex Package /jinstall-ex-4200-14.1X53-D52.4-domestic-signed.tgz is signed... /kernel data=0x653a7c+0x91b78 syms=[0x4+0x63e90+0x4+0x98b8a] Kernel entry at 0x800000c0 ... GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1996-2019, Juniper Networks, Inc. All rights reserved. Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. JUNOS 14.1X53-D52.4 #0: 2019-11-08 20:05:44 UTC builder@dagmath-vm01.juniper.net:/volume/build/junos/14.1/service/14.1X53-D52.4/obj-powerpc/junos/bsd/kernels/INSTALL-EX/kernel Timecounter "decrementer" frequency 50000000 Hz quality 0 cpu0: Freescale e500v2 core revision 2.2 cpu0: HID0 80004080 real memory = 1031798784 (984 MB) avail memory = 1009856512 (963 MB) ETHERNET SOCKET BRIDGE initialising Initializing EXSERIES properties ... nexus0: ocpbus0: on nexus0 openpic0: iomem 0xfef40000-0xfef600b3 on ocpbus0 memctl0: iomem 0xfef20000-0xfef20e5b,0xfef02000-0xfef02e5b irq 32,34 on ocpbus0 i2c0: iomem 0xfef03000-0xfef03014 irq 59 on ocpbus0 i2c1: iomem 0xfef03100-0xfef03114 irq 59 on ocpbus0 uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0 uart0: console (9600,n,8,1) uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0 lbc0: iomem 0xfef05000-0xfef05fff,0xff000000-0xffffffff irq 22 on ocpbus0 cfi0: iomem 0xff800000-0xffffffff on lbc0 syspld0 iomem 0xff000000-0xff00ffff on lbc0 tsec0: iomem 0xfef24000-0xfef24fff irq 45,46,50 on ocpbus0 tsec0: hardware MAC address 2c:6b:f5:8d:f5:3f miibus0: on tsec0 e1000phy0: on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto pcib0: iomem 0xfef08000-0xfef08fff,0xf0000000-0xf3ffffff on ocpbus0 pci0: on pcib0 pci0: at device 18.0 (no driver attached) ehci0: mem 0xf0001000-0xf00010ff irq 22 at device 18.2 on pci0 usb0: EHCI version 1.0 usb0: on ehci0 usb0: USB revision 2.0 uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2 umass1: vendor 0x13fe USB DISK 3.0, rev 2.10/1.00, addr 3 pcib1: iomem 0xfef0a000-0xfef0afff,0xe0000000-0xe3ffffff,0xec000000-0xec0fffff irq 42 on ocpbus0 pci1: on pcib1 pcib2: at device 0.0 on pci1 pci2: on pcib2 pci2: at device 0.0 (no driver attached) pcib3: iomem 0xfef0b000-0xfef0bfff,0xe8000000-0xebffffff,0xec200000-0xec2fffff irq 43 on ocpbus0 pci3: on pcib3 pcib4: at device 0.0 on pci3 pci4: on pcib4 pci4: at device 0.0 (no driver attached) Initializing product: 41 .. ###PCB Group initialized for udppcbgroup ###PCB Group initialized for tcppcbgroup md0: Preloaded image 21059584 bytes at 0x807e2018 da1 at umass-sim1 bus 1 target 0 lun 0 da1: < USB DISK 3.0 PMAP> Removable Direct Access SCSI-6 device da1: 40.000MB/s transfers da1: 29573MB (60566016 512 byte sectors: 255H 63S/T 3770C) da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C) Kernel thread "wkupdaemon" (pid 42) exited prematurely. Trying to mount root from cd9660:/dev/md0 [: -eq: unexpected operator 1+0 records in 1+0 records out 512 bytes transferred in 0.000196 secs (2612511 bytes/sec) Media check on da0 on ex platforms Formatting installation disk... 1000+0 records in 1000+0 records out 1048576000 bytes transferred in 232.042936 secs (4518888 bytes/sec) Computing slice and partition sizes for /dev/da0 ... Formatting target media /dev/da0 ... Preparing to create slices on /dev/da0 /dev/da0: 2048000 sectors [C:1000 H:64 S:32 SS:512] Shrinking slice 1 by 256 blocks for alignment 1+0 records in 1+0 records out 512 bytes transferred in 0.000196 secs (2612511 bytes/sec) Creating slices: g c1000 h64 s32 p 1 0xA5 256 382720 p 2 0xA5 382976 382976 p 3 0xA5 765952 1024000 p 4 0xA5 1789952 258048 a 1 ******* Working on device /dev/da0 ******* fdisk: invalid fdisk partition table found Computing layout of partitions in /dev/da0s1... Shrinking partition a by 1792 blocks for alignment Labeling /dev/da0s1: bsdlabel: write to disk label supressed - label was as follows: # /dev/da0s1: 8 partitions: # size offset fstype [fsize bsize bps/cpg] a: 380672 256 unused 0 0 c: 382720 0 unused 0 0 # "raw" part, don't edit /dev/da0s1a: 185.9MB (380668 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 46.47MB, 2974 blks, 6016 inodes. with soft updates super-block backups (for fsck -b #) at: 32, 95200, 190368, 285536 Computing layout of partitions in /dev/da0s2... Labeling /dev/da0s2: bsdlabel: write to disk label supressed - label was as follows: # /dev/da0s2: 8 partitions: # size offset fstype [fsize bsize bps/cpg] a: 382720 256 unused 0 0 c: 382976 0 unused 0 0 # "raw" part, don't edit /dev/da0s2a: 186.9MB (382716 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 46.72MB, 2990 blks, 6016 inodes. with soft updates super-block backups (for fsck -b #) at: 32, 95712, 191392, 287072 Computing layout of partitions in /dev/da0s3... Shrinking partition d by 256 blocks for alignment Labeling /dev/da0s3: bsdlabel: write to disk label supressed - label was as follows: # /dev/da0s3: 8 partitions: # size offset fstype [fsize bsize bps/cpg] c: 1024000 0 unused 0 0 # "raw" part, don't edit d: 767744 256 unused 0 0 e: 256000 768000 unused 0 0 /dev/da0s3d: 374.9MB (767740 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 93.72MB, 5998 blks, 12032 inodes. with soft updates super-block backups (for fsck -b #) at: 32, 191968, 383904, 575840 /dev/da0s3e: 125.0MB (255996 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 31.25MB, 2000 blks, 4096 inodes. with soft updates super-block backups (for fsck -b #) at: 32, 64032, 128032, 192032 Computing layout of partitions in /dev/da0s4... Shrinking partition d by 256 blocks for alignment Labeling /dev/da0s4: bsdlabel: write to disk label supressed - label was as follows: # /dev/da0s4: 8 partitions: # size offset fstype [fsize bsize bps/cpg] c: 258048 0 unused 0 0 # "raw" part, don't edit d: 128768 256 unused 0 0 /dev/da0s4d: 62.9MB (128764 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 15.72MB, 1006 blks, 2048 inodes. with soft updates super-block backups (for fsck -b #) at: 32, 32224, 64416, 96608 [: -eq: unexpected operator Installing net0:/jinstall-ex-4200-14.1X53-D52.4-domestic-signed.tgz /dev/da0s3d: 374.9MB (767740 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 93.72MB, 5998 blks, 12032 inodes. with soft updates super-block backups (for fsck -b #) at: 32, 191968, 383904, 575840 add default: gateway 255.255.255.255: No route to host PING 192.168.1.204 (192.168.1.204): 56 data bytes 64 bytes from 192.168.1.204: icmp_seq=0 ttl=64 time=0.770 ms --- 192.168.1.204 ping statistics --- 1 packets transmitted, 1 packets received, 0% packet loss round-trip min/avg/max/stddev = 0.770/0.770/0.770/0.000 ms Downloading /jinstall-ex-4200-14.1X53-D52.4-domestic-signed.tgz from 192.168.1.204 Verified jinstall-ex-4200-14.1X53-D52.4-domestic.tgz signed by PackageProductionRSA_2019 cli: not found wc: not found [: -lt: argument expected Checking package integrity... Running requirements check first for jbundle-ex-4200-14.1X53-D52.4-... Running pre-install for jbundle-ex-4200-14.1X53-D52.4-... Installing jbundle-ex-4200-14.1X53-D52.4- in /tmp/installer.tmp/pa4658.29/jbundle-ex-4200-14.1X53-D52.4-domestic.x4658... Running post-install for jbundle-ex-4200-14.1X53-D52.4-... Verified SHA1 checksum of fips-mode-powerpc-14.1X53-D52.4.tgz Verified SHA1 checksum of jboot-ex-14.1X53-D52.4.tgz Verified SHA1 checksum of jdocs-ex-14.1X53-D52.4.tgz Verified SHA1 checksum of junos-ex-14.1X53-D52.4.tgz Verified SHA1 checksum of junos-ex-4200-14.1X53-D52.4.tgz Verified SHA1 checksum of jweb-ex-14.1X53-D52.4.tgz Adding fips-mode-powerpc-14.1X53-D52.4.tgz... Adding jdocs-ex-14.1X53-D52.4.tgz... Adding junos-ex-4200-14.1X53-D52.4.tgz... Adding jweb-ex-14.1X53-D52.4.tgz... mkdir: /jail: No such file or directory Initializing the alternate root slice... Rebooting to complete the installation. Please wait... Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 0 done syncing disks... All buffers synced. Uptime: 10m39s Rebooting... U-Boot 1.1.6 (Jul 5 2012 - 11:58:22) Board: EX4200-24T 2.2 EPLD: Version 6.0 (0x85) DRAM: Initializing (1024 MB) FLASH: 8 MB Firmware Version: --- 01.00.00 --- USB: scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 2 Storage Device(s) found ELF file is 32 bit Consoles: U-Boot console FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4 (builder@greteth, Thu Jul 5 11:29:34 UTC 2012) Memory: 1024MB bootsequencing is enabled bootsuccess is set new boot device = disk0s1: Loading /boot/defaults/loader.conf /kernel data=0xab5454+0xd54f0 syms=[0x4+0x99dd0+0x4+0xe4236] Hit [Enter] to boot immediately, or space bar for command prompt. Booting [/kernel]... Kernel entry at 0x800000c0 ... GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1996-2019, Juniper Networks, Inc. All rights reserved. Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. JUNOS 14.1X53-D52.4 #0: 2019-11-08 20:24:06 UTC builder@dagmath-vm01.juniper.net:/volume/build/junos/14.1/service/14.1X53-D52.4/obj-powerpc/junos/bsd/kernels/JUNIPER-EX/kernel Timecounter "decrementer" frequency 50000000 Hz quality 0 cpu0: Freescale e500v2 core revision 2.2 cpu0: HID0 80004080 real memory = 1044381696 (996 MB) avail memory = 1022398464 (975 MB) Security policy loaded: JUNOS MAC/pcap (mac_pcap) Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot) Security policy loaded: Junos MAC/veriexec (mac_veriexec) MAC/veriexec fingerprint module loaded: SHA256 MAC/veriexec fingerprint module loaded: SHA1 ETHERNET SOCKET BRIDGE initialising Initializing EXSERIES properties ... nexus0: ocpbus0: on nexus0 openpic0: iomem 0xfef40000-0xfef600b3 on ocpbus0 memctl0: iomem 0xfef20000-0xfef20e5b,0xfef02000-0xfef02e5b irq 32,34 on ocpbus0 i2c0: iomem 0xfef03000-0xfef03014 irq 59 on ocpbus0 poe0: on i2c0 i2c1: iomem 0xfef03100-0xfef03114 irq 59 on ocpbus0 uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0 uart0: console (9600,n,8,1) uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0 lbc0: iomem 0xfef05000-0xfef05fff,0xff000000-0xffffffff irq 22 on ocpbus0 cb fpga: un-supported RE/board:37 cfi0: iomem 0xff800000-0xffffffff on lbc0 cb fpga: un-supported RE/board:37 syspld0 iomem 0xff000000-0xff00ffff on lbc0 tsec0: iomem 0xfef24000-0xfef24fff irq 45,46,50 on ocpbus0 tsec0: hardware MAC address 2c:6b:f5:8d:f5:3f miibus0: on tsec0 e1000phy0: on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto pcib0: iomem 0xfef08000-0xfef08fff,0xf0000000-0xf3ffffff on ocpbus0 pci0: on pcib0 pci0: at device 18.0 (no driver attached) ehci0: mem 0xf0001000-0xf00010ff irq 22 at device 18.2 on pci0 usb0: EHCI version 1.0 usb0: on ehci0 usb0: USB revision 2.0 uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2 umass1: vendor 0x13fe USB DISK 3.0, rev 2.10/1.00, addr 3 pcib1: iomem 0xfef0a000-0xfef0afff,0xe0000000-0xe3ffffff,0xec000000-0xec0fffff irq 42 on ocpbus0 pci1: on pcib1 pcib2: at device 0.0 on pci1 pci2: on pcib2 mpfe0: mem 0xa4000000-0xa40fffff,0xa0000000-0xa3ffffff irq 19 at device 0.0 on pci2 mpfe_adcr_shadow_alloc: allocated idx: 0 pcib3: iomem 0xfef0b000-0xfef0bfff,0xe8000000-0xebffffff,0xec200000-0xec2fffff irq 43 on ocpbus0 pci3: on pcib3 pcib4: at device 0.0 on pci3 pci4: on pcib4 mpfe1: mem 0xb4000000-0xb40fffff,0xb0000000-0xb3ffffff irq 18 at device 0.0 on pci4 mpfe_adcr_shadow_alloc: allocated idx: 1 idma0: iomem 0xfef21000-0xfef21300 irq 36 on ocpbus0 Initializing product: 41 .. Loading Redundant LT driver ###PCB Group initialized for udppcbgroup ###PCB Group initialized for tcppcbgroup Kernel thread "wkupdaemon" (pid 44) exited prematurely. da1 at umass-sim1 bus 1 target 0 lun 0 da1: < USB DISK 3.0 PMAP> Removable Direct Access SCSI-6 device da1: 40.000MB/s transfers da1: 29573MB (60566016 512 byte sectors: 255H 63S/T 3770C) da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C) Trying to mount root from ufs:/dev/da0s1a Attaching /packages/junos via /dev/mdctl... Mounted junos-ex package on /dev/md0... Verified manifest signed by PackageProductionEc_2019 Verified jboot signed by PackageProductionEc_2019 Verified junos-ex-14.1X53-D52.4 signed by PackageProductionEc_2019 Mounted fips-mode-powerpc package on /dev/md2... Verified manifest signed by PackageProductionEc_2019 Verified fips-mode-powerpc-14.1X53-D52.4 signed by PackageProductionEc_2019 Mounted jdocs-ex package on /dev/md4... Verified manifest signed by PackageProductionEc_2019 Verified jdocs-ex-14.1X53-D52.4 signed by PackageProductionEc_2019 Mounted junos-ex-4200 package on /dev/md6... Verified manifest signed by PackageProductionEc_2019 Verified junos-ex-4200-14.1X53-D52.4 signed by PackageProductionEc_2019 Mounted jweb-ex package on /dev/md8... Verified manifest signed by PackageProductionEc_2019 Verified jweb-ex-14.1X53-D52.4 signed by PackageProductionEc_2019 Executing /packages/mnt/jweb-ex-14.1X53-D52.4/mount.post.. Automatic reboot in progress... Media check on da0 on ex platforms ** Last Mounted on /instrootmnt ** Root file system ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 1544 files, 76539 used, 17051 free (11 frags, 2130 blocks, 0.0% fragmentation) ** Last Mounted on /instrootmnt/var ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 94 files, 114 used, 62788 free (12 frags, 7847 blocks, 0.0% fragmentation) Computing slice and partition sizes for /dev/da0 ... checking for core dump... savecore: Reboot reason(s): 0x2: watchdog No dump exists ** Last Mounted on /instrootmnt/var/tmp ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 5 files, 5 used, 188849 free (41 frags, 23601 blocks, 0.0% fragmentation) ** Last Mounted on /instrootmnt/config ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 11 files, 10 used, 31596 free (28 frags, 3946 blocks, 0.1% fragmentation) dump automerge buckets no 0: dump automerge buckets no 0: Creating initial configuration...mgd: error: Cannot open configuration file: /config/juniper.conf mgd: warning: activating factory configuration mgd: Running FIPS Self-tests veriexec: no signatures for device. file='/sbin/kats/cannot-exec' fsid=89 fileid=51404 gen=1 uid=0 pid=526 mgd: FIPS Self-tests Passed mgd: commit complete mgd: ---------------------------------------------------------- mgd: Please login as 'root'. No password is required. mgd: To start Initial Setup, type 'ezsetup' at the JUNOS prompt. mgd: To start JUNOS CLI, type 'cli' at the JUNOS prompt. mgd: ---------------------------------------------------------- Setting initial options: debugger_on_panic=NO debugger_on_break=NO. Starting optional daemons: . Doing initial network setup: . Initial interface configuration: additional daemons:. Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/modules/peertype;/modules/ifpfe_drv;/modules/platform;/modules; kld netpfe drv: ifpfed_chmicLoading the CHMIC module ifpfed_ethinterface ifpfed_eth.1 already present in the KLD 'kernel'! kldload: can't load /modules/ifpfe_drv/ifpfed_eth.ko: Exec format error ifpfed_ml_cmn ifpfed_svcskld plLoading the EX-series platform NETPFE module atform: ex_ifpfe if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1 ipsec kld. Doing additional network setup:. Starting final network daemons:. starting local daemons:set cores for group access . Boot media /dev/da0 has dual root support ** /dev/da0s2a FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 17563 free (27 frags, 2192 blocks, 0.0% fragmentation) setting ldconfig path: /usr/lib /opt/lib starting standard daemons: cron. Local package initialization:. Initialize /var subdirs Fri Nov 8 21:30:06 UTC 2019 Amnesiac (ttyu0) root@:RE:0% cli {master:0} root> NOS 14.1X53-D52.4 built 2019-11-08 20:24:06 UTC {master:0} root> {master:0} root> {master:0} root> show version fpc0: -------------------------------------------------------------------------- Model: ex4200-24t Junos: 14.1X53-D52.4 JUNOS EX Software Suite [14.1X53-D52.4] JUNOS FIPS mode utilities [14.1X53-D52.4] JUNOS Online Documentation [14.1X53-D52.4] JUNOS EX 4200 Software Suite [14.1X53-D52.4] JUNOS Web Management Platform Package [14.1X53-D52.4] {master:0} root> umass1: at uhub0 port 1 (addr 3) disconnected (da1:umass-sim1:1:0:0): lost device (da1:umass-sim1:1:0:0): removing device entry umass1: detached {master:0} root> request system reboot Reboot the system ? [yes,no] (no) yes *** System shutdown message from root@ *** System going down in 1 minute Shutdown at Fri Nov 8 21:35:42 2019. [pid 1811] {master:0} root> *** System shutdown message from root@ *** System going down in 30 seconds *** FINAL System shutdown message from root@ *** System going down IMMEDIATELY NNWaiting (max 60 seconds) for system process `vnlru_mem' to stop...done Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...5 5 5 5 0 1 1 1 0 0 1 1 1 0 0 0 0 0 0 done syncing disks... All buffers synced. Uptime: 9m11s recorded reboot as normal shutdown Rebooting... U-Boot 1.1.6 (Jul 5 2012 - 11:58:22) Board: EX4200-24T 2.2 EPLD: Version 6.0 (0x85) DRAM: Initializing (1024 MB) FLASH: 8 MB Firmware Version: --- 01.00.00 --- USB: scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found ELF file is 32 bit Consoles: U-Boot console FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4 (builder@greteth, Thu Jul 5 11:29:34 UTC 2012) Memory: 1024MB bootsequencing is enabled bootsuccess is set new boot device = disk0s1: Loading /boot/defaults/loader.conf /kernel data=0xab5454+0xd54f0 syms=[0x4+0x99dd0+0x4+0xe4236] Hit [Enter] to boot immediately, or space bar for command prompt. Booting [/kernel]... Kernel entry at 0x800000c0 ... GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1996-2019, Juniper Networks, Inc. All rights reserved. Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. JUNOS 14.1X53-D52.4 #0: 2019-11-08 20:24:06 UTC builder@dagmath-vm01.juniper.net:/volume/build/junos/14.1/service/14.1X53-D52.4/obj-powerpc/junos/bsd/kernels/JUNIPER-EX/kernel Timecounter "decrementer" frequency 50000000 Hz quality 0 cpu0: Freescale e500v2 core revision 2.2 cpu0: HID0 80004080 real memory = 1044381696 (996 MB) avail memory = 1022398464 (975 MB) Security policy loaded: JUNOS MAC/pcap (mac_pcap) Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot) Security policy loaded: Junos MAC/veriexec (mac_veriexec) MAC/veriexec fingerprint module loaded: SHA256 MAC/veriexec fingerprint module loaded: SHA1 ETHERNET SOCKET BRIDGE initialising Initializing EXSERIES properties ... nexus0: ocpbus0: on nexus0 openpic0: iomem 0xfef40000-0xfef600b3 on ocpbus0 memctl0: iomem 0xfef20000-0xfef20e5b,0xfef02000-0xfef02e5b irq 32,34 on ocpbus0 i2c0: iomem 0xfef03000-0xfef03014 irq 59 on ocpbus0 poe0: on i2c0 i2c1: iomem 0xfef03100-0xfef03114 irq 59 on ocpbus0 uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0 uart0: console (9600,n,8,1) uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0 lbc0: iomem 0xfef05000-0xfef05fff,0xff000000-0xffffffff irq 22 on ocpbus0 cb fpga: un-supported RE/board:37 cfi0: iomem 0xff800000-0xffffffff on lbc0 cb fpga: un-supported RE/board:37 syspld0 iomem 0xff000000-0xff00ffff on lbc0 tsec0: iomem 0xfef24000-0xfef24fff irq 45,46,50 on ocpbus0 tsec0: hardware MAC address 2c:6b:f5:8d:f5:3f miibus0: on tsec0 e1000phy0: on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto pcib0: iomem 0xfef08000-0xfef08fff,0xf0000000-0xf3ffffff on ocpbus0 pci0: on pcib0 pci0: at device 18.0 (no driver attached) ehci0: mem 0xf0001000-0xf00010ff irq 22 at device 18.2 on pci0 usb0: EHCI version 1.0 usb0: on ehci0 usb0: USB revision 2.0 uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2 pcib1: iomem 0xfef0a000-0xfef0afff,0xe0000000-0xe3ffffff,0xec000000-0xec0fffff irq 42 on ocpbus0 pci1: on pcib1 pcib2: at device 0.0 on pci1 pci2: on pcib2 mpfe0: mem 0xa4000000-0xa40fffff,0xa0000000-0xa3ffffff irq 19 at device 0.0 on pci2 mpfe_adcr_shadow_alloc: allocated idx: 0 pcib3: iomem 0xfef0b000-0xfef0bfff,0xe8000000-0xebffffff,0xec200000-0xec2fffff irq 43 on ocpbus0 pci3: on pcib3 pcib4: at device 0.0 on pci3 pci4: on pcib4 mpfe1: mem 0xb4000000-0xb40fffff,0xb0000000-0xb3ffffff irq 18 at device 0.0 on pci4 mpfe_adcr_shadow_alloc: allocated idx: 1 idma0: iomem 0xfef21000-0xfef21300 irq 36 on ocpbus0 Initializing product: 41 .. Loading Redundant LT driver ###PCB Group initialized for udppcbgroup ###PCB Group initialized for tcppcbgroup da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C) Kernel thread "wkupdaemon" (pid 44) exited prematurely. Trying to mount root from ufs:/dev/da0s1a Attaching /packages/junos via /dev/mdctl... Mounted junos-ex package on /dev/md0... Verified manifest signed by PackageProductionEc_2019 Verified jboot signed by PackageProductionEc_2019 Verified junos-ex-14.1X53-D52.4 signed by PackageProductionEc_2019 Mounted fips-mode-powerpc package on /dev/md2... Verified manifest signed by PackageProductionEc_2019 Verified fips-mode-powerpc-14.1X53-D52.4 signed by PackageProductionEc_2019 Mounted jdocs-ex package on /dev/md4... Verified manifest signed by PackageProductionEc_2019 Verified jdocs-ex-14.1X53-D52.4 signed by PackageProductionEc_2019 Mounted junos-ex-4200 package on /dev/md6... Verified manifest signed by PackageProductionEc_2019 Verified junos-ex-4200-14.1X53-D52.4 signed by PackageProductionEc_2019 Mounted jweb-ex package on /dev/md8... Verified manifest signed by PackageProductionEc_2019 Verified jweb-ex-14.1X53-D52.4 signed by PackageProductionEc_2019 Executing /packages/mnt/jweb-ex-14.1X53-D52.4/mount.post.. Automatic reboot in progress... Media check on da0 on ex platforms ** Last Mounted on /instrootmnt ** Root file system ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 1544 files, 76539 used, 17051 free (11 frags, 2130 blocks, 0.0% fragmentation) ** Last Mounted on /var ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 418 files, 1043 used, 61859 free (123 frags, 7717 blocks, 0.2% fragmentation) Computing slice and partition sizes for /dev/da0 ... checking for core dump... savecore: Reboot reason(s): 0x2: watchdog No dump exists ** Last Mounted on /var/tmp ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 12 files, 74 used, 188780 free (28 frags, 23594 blocks, 0.0% fragmentation) ** Last Mounted on /config ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 23 files, 30 used, 31576 free (40 frags, 3942 blocks, 0.1% fragmentation) rm: /var/etc/pam.con: Operation not permitted dump automerge buckets no 0: dump automerge buckets no 0: mkdir: /mfs/var/sdb: No such file or directory mkdir: /mfs/var/sdb: No such file or directory Creating initial configuration...mgd: Running FIPS Self-tests veriexec: no signatures for device. file='/sbin/kats/cannot-exec' fsid=74 fileid=51404 gen=1 uid=0 pid=510 mgd: FIPS Self-tests Passed mgd: commit complete Setting initial options: debugger_on_panic=NO debugger_on_break=NO. Starting optional daemons: . Doing initial network setup: . Initial interface configuration: additional daemons:. Additional routing options:kern.module_path: /boot//kernel;Loading the CHMIC module /boot/modules -> /boot/modules;/interface ifpfed_eth.1 already present in the KLD 'kernel'! modules/peertype;/modules/ifpfe_drv;/modules/platform;/modules; kld netpfe drv: ifpfed_chmic ifLoading the EX-series platform NETPFE module pfed_ethkldload: can't load /modules/ifpfe_drv/ifpfed_eth.ko: Exec format error ifpfed_ml_cmn ifpfed_svcskld platform: ex_ifpfe if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1 ipsec kld. Doing additional network setup:. Starting final network daemons:. starting local daemons:set cores for group access . Boot media /dev/da0 has dual root support ** /dev/da0s2a FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 17563 free (27 frags, 2192 blocks, 0.0% fragmentation) setting ldconfig path: /usr/lib /opt/lib starting standard daemons: cron. Local package initialization:. Initialize /var subdirs Fri Nov 8 21:38:38 UTC 2019 Amnesiac (ttyu0) login: root Broadcast Message from root@ (no tty) at 21:39 UTC... ALERT:Auto image Upgrade will start. This can terminate config CLI sess ion(s). Modified configuration will be lost. To stop Auto-image, in CLI do the following: 'edit; delete chassis auto-image-upgrade; commit'. root@:RE:0% cli {master:0} root> show version fpc0: -------------------------------------------------------------------------- Model: ex4200-24t Junos: 14.1X53-D52.4 JUNOS EX Software Suite [14.1X53-D52.4] JUNOS FIPS mode utilities [14.1X53-D52.4] JUNOS Online Documentation [14.1X53-D52.4] JUNOS EX 4200 Software Suite [14.1X53-D52.4] JUNOS Web Management Platform Package [14.1X53-D52.4] {master:0} root> show system snapshot media internal fpc0: -------------------------------------------------------------------------- Information for snapshot on internal (/dev/da0s1a) (primary) Creation date: Nov 8 21:26:11 2019 JUNOS version on snapshot: jdocs-ex: 14.1X53-D52.4 junos : ex-14.1X53-D52.4 junos-ex-4200: 14.1X53-D52.4 jweb-ex: 14.1X53-D52.4 Information for snapshot on internal (/dev/da0s2a) (backup) Creation date: Nov 8 21:27:22 2019 JUNOS version on snapshot: jdocs-ex: 14.1X53-D52.4 junos : ex-14.1X53-D52.4 junos-ex-4200: 14.1X53-D52.4 jweb-ex: 14.1X53-D52.4 {master:0} root> ...l/jinstall-ex-4200-15.1R7.9-controlled-signed.tgz no-copy Checking pending install on fpc0 Validating on fpc0 Done with validate of on VC members fpc0: Verify the signature of the new package Verified jinstall-ex-4200-15.1R7.9-controlled.tgz signed by PackageProductionRSA_2018 WARNING: A reboot is required to install the software WARNING: Use the 'request system reboot' command immediately {master:0} root> request system reboot Reboot the system ? [yes,no] (no) yes Shutdown at Fri Nov 8 22:02:10 2019. [pid 2336] *** System shutdown message from root@ *** System going down in 1 minute {master:0} root> *** System shutdown message from root@ *** System going down in 30 seconds *** FINAL System shutdown message from root@ *** System going down IMMEDIATELY NWaiting (max 60 seconds) for system process `vnlru_mem' to stop...done Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...4 4 3 3 1 2 2 2 1 0 0 0 0 0 done syncing disks... All buffers synced. Uptime: 26m24s recorded reboot as normal shutdown Rebooting... U-Boot 1.1.6 (Jul 5 2012 - 11:58:22) Board: EX4200-24T 2.2 EPLD: Version 6.0 (0x85) DRAM: Initializing (1024 MB) FLASH: 8 MB Firmware Version: --- 01.00.00 --- USB: scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found ELF file is 32 bit Consoles: U-Boot console FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4 (builder@greteth, Thu Jul 5 11:29:34 UTC 2012) Memory: 1024MB bootsequencing is enabled bootsuccess is set new boot device = disk0s1: Package /mchassis-install.tgz is signed... /kernel data=0x69b300+0x93624 syms=[0x4+0x67960+0x4+0xa051b] Kernel entry at 0x800000c0 ... GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1996-2018, Juniper Networks, Inc. All rights reserved. Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. JUNOS 15.1R7.9 #0: 2018-09-11 05:30:26 UTC builder@watatsumi.juniper.net:/volume/build/junos/15.1/release/15.1R7.9/obj/powerpc/junos/bsd/kernels/INSTALL-EX/kernel can't re-use a leaf (all_slot_serialid)! Timecounter "decrementer" frequency 50000000 Hz quality 0 cpu0: Freescale e500v2 core revision 2.2 cpu0: HID0 80004080 real memory = 1027604480 (980 MB) avail memory = 1005342720 (958 MB) ETHERNET SOCKET BRIDGE initialising Initializing EXSERIES properties ... nexus0: ocpbus0: on nexus0 openpic0: iomem 0xfef40000-0xfef600b3 on ocpbus0 memctl0: iomem 0xfef20000-0xfef20e5b,0xfef02000-0xfef02e5b irq 32,34 on ocpbus0 i2c0: iomem 0xfef03000-0xfef03014 irq 59 on ocpbus0 i2c1: iomem 0xfef03100-0xfef03114 irq 59 on ocpbus0 uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0 uart0: console (9600,n,8,1) uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0 lbc0: iomem 0xfef05000-0xfef05fff,0xff000000-0xffffffff irq 22 on ocpbus0 cfi0: iomem 0xff800000-0xffffffff on lbc0 syspld0 iomem 0xff000000-0xff00ffff on lbc0 tsec0: iomem 0xfef24000-0xfef24fff irq 45,46,50 on ocpbus0 tsec0: hardware MAC address 2c:6b:f5:8d:f5:3f miibus0: on tsec0 e1000phy0: on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto pcib0: iomem 0xfef08000-0xfef08fff,0xf0000000-0xf3ffffff on ocpbus0 pci0: on pcib0 pci0: at device 18.0 (no driver attached) ehci0: mem 0xf0001000-0xf00010ff irq 22 at device 18.2 on pci0 usb0: EHCI version 1.0 usb0: on ehci0 usb0: USB revision 2.0 uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2 pcib1: iomem 0xfef0a000-0xfef0afff,0xe0000000-0xe3ffffff,0xec000000-0xec0fffff irq 42 on ocpbus0 pci1: on pcib1 pcib2: at device 0.0 on pci1 pci2: on pcib2 pci2: at device 0.0 (no driver attached) pcib3: iomem 0xfef0b000-0xfef0bfff,0xe8000000-0xebffffff,0xec200000-0xec2fffff irq 43 on ocpbus0 pci3: on pcib3 pcib4: at device 0.0 on pci3 pci4: on pcib4 pci4: at device 0.0 (no driver attached) Initializing product: 41 .. ###PCB Group initialized for udppcbgroup ###PCB Group initialized for tcppcbgroup md0: Preloaded image 22267904 bytes at 0x808367a8 da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C) Kernel thread "wkupdaemon" (pid 43) exited prematurely. Trying to mount root from cd9660:/dev/md0 [: -eq: unexpected operator 1+0 records in 1+0 records out 512 bytes transferred in 0.000189 secs (2708050 bytes/sec) Media check on da0 on ex platforms Computing slice and partition sizes for /dev/da0 ... 32+0 records in 32+0 records out 16384 bytes transferred in 0.182813 secs (89622 bytes/sec) Checking s1a label...please wait ** Last Mounted on /instrootmnt ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 1544 files, 76539 used, 17051 free (11 frags, 2130 blocks, 0.0% fragmentation) tunefs: soft updates remains unchanged as enabled Checking s2a label...please wait Computing layout of partitions in /dev/da0s2... Labeling /dev/da0s2: bsdlabel: write to disk label supressed - label was as follows: # /dev/da0s2: 8 partitions: # size offset fstype [fsize bsize bps/cpg] a: 382720 256 unused 0 0 c: 382976 0 unused 0 0 # "raw" part, don't edit /dev/da0s2a: 186.9MB (382716 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 46.72MB, 2990 blks, 6016 inodes. with soft updates super-block backups (for fsck -b #) at: 32, 95712, 191392, 287072 Checking s3d label...please wait ** Last Mounted on /var/tmp ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 3 files, 68586 used, 120268 free (28 frags, 15030 blocks, 0.0% fragmentation) tunefs: soft updates remains unchanged as enabled Checking s3e label...please wait ** Last Mounted on /var ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 429 files, 1135 used, 61767 free (175 frags, 7699 blocks, 0.3% fragmentation) tunefs: soft updates remains unchanged as enabled Checking s4d label...please wait ** Last Mounted on /config ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 25 files, 32 used, 31574 free (38 frags, 3942 blocks, 0.1% fragmentation) tunefs: soft updates remains unchanged as enabled [: -eq: unexpected operator Installing disk0s3d:/mchassis-install.tgz Verified jinstall-ex-4200-15.1R7.9-controlled.tgz signed by PackageProductionRSA_2018 method RSA2048+SHA1 cli: not found wc: not found [: -lt: argument expected date: connect: Can't assign requested address Checking package integrity... Running requirements check first for jbundle-ex-4200-15.1R7.9-... Running pre-install for jbundle-ex-4200-15.1R7.9-... Installing jbundle-ex-4200-15.1R7.9- in /tmp/installer.tmp/pa4658.52/jbundle-ex-4200-15.1R7.9-controlled.x4658... Running post-install for jbundle-ex-4200-15.1R7.9-... Verified SHA1 checksum of fips-mode-powerpc-15.1R7.9.tgz Verified SHA1 checksum of jboot-ex-15.1R7.9.tgz Verified SHA1 checksum of jcrypto-ex-15.1R7.9.tgz Verified SHA1 checksum of jdocs-ex-15.1R7.9.tgz Verified SHA1 checksum of junos-ex-15.1R7.9.tgz Verified SHA1 checksum of junos-ex-4200-15.1R7.9.tgz Verified SHA1 checksum of jweb-ex-15.1R7.9.tgz Adding fips-mode-powerpc-15.1R7.9.tgz... Adding jcrypto-ex-15.1R7.9.tgz... Adding jdocs-ex-15.1R7.9.tgz... Adding junos-ex-4200-15.1R7.9.tgz... Adding jweb-ex-15.1R7.9.tgz... mkdir: /jail: No such file or directory Rebooting to complete the installation. Please wait... Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 0 0 0 0 0 0 0 0 done syncing disks... All buffers synced. Uptime: 5m35s Rebooting... U-Boot 1.1.6 (Jul 5 2012 - 11:58:22) Board: EX4200-24T 2.2 EPLD: Version 6.0 (0x85) DRAM: Initializing (1024 MB) FLASH: 8 MB Firmware Version: --- 01.00.00 --- USB: scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found ELF file is 32 bit Consoles: U-Boot console FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4 (builder@greteth, Thu Jul 5 11:29:34 UTC 2012) Memory: 1024MB bootsequencing is enabled bootsuccess is set new boot device = disk0s2: Loading /boot/defaults/loader.conf /kernel data=0xb71e7c+0xd12b0 syms=[0x4+0x9dce0+0x4+0xec41d] Hit [Enter] to boot immediately, or space bar for command prompt. Booting [/kernel]... Kernel entry at 0x800000c0 ... GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1996-2018, Juniper Networks, Inc. All rights reserved. Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. JUNOS 15.1R7.9 #0: 2018-09-11 05:42:39 UTC builder@watatsumi.juniper.net:/volume/build/junos/15.1/release/15.1R7.9/obj/powerpc/junos/bsd/kernels/JUNIPER-EX/kernel can't re-use a leaf (all_slot_serialid)! Timecounter "decrementer" frequency 50000000 Hz quality 0 cpu0: Freescale e500v2 core revision 2.2 cpu0: HID0 80004080 real memory = 1044381696 (996 MB) avail memory = 1022398464 (975 MB) Security policy loaded: JUNOS MAC/pcap (mac_pcap) Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot) Security policy loaded: Junos MAC/veriexec (mac_veriexec) MAC/veriexec fingerprint module loaded: SHA1 MAC/veriexec fingerprint module loaded: SHA256 ETHERNET SOCKET BRIDGE initialising Initializing EXSERIES properties ... nexus0: ocpbus0: on nexus0 openpic0: iomem 0xfef40000-0xfef600b3 on ocpbus0 memctl0: iomem 0xfef20000-0xfef20e5b,0xfef02000-0xfef02e5b irq 32,34 on ocpbus0 i2c0: iomem 0xfef03000-0xfef03014 irq 59 on ocpbus0 poe0: on i2c0 i2c1: iomem 0xfef03100-0xfef03114 irq 59 on ocpbus0 uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0 uart0: console (9600,n,8,1) uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0 lbc0: iomem 0xfef05000-0xfef05fff,0xff000000-0xffffffff irq 22 on ocpbus0 cb fpga: un-supported RE/board:37 cfi0: iomem 0xff800000-0xffffffff on lbc0 cb fpga: un-supported RE/board:37 syspld0 iomem 0xff000000-0xff00ffff on lbc0 tsec0: iomem 0xfef24000-0xfef24fff irq 45,46,50 on ocpbus0 tsec0: hardware MAC address 2c:6b:f5:8d:f5:3f miibus0: on tsec0 e1000phy0: on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto pcib0: iomem 0xfef08000-0xfef08fff,0xf0000000-0xf3ffffff on ocpbus0 pci0: on pcib0 pci0: at device 18.0 (no driver attached) ehci0: mem 0xf0001000-0xf00010ff irq 22 at device 18.2 on pci0 usb0: EHCI version 1.0 usb0: on ehci0 usb0: USB revision 2.0 uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2 pcib1: iomem 0xfef0a000-0xfef0afff,0xe0000000-0xe3ffffff,0xec000000-0xec0fffff irq 42 on ocpbus0 pci1: on pcib1 pcib2: at device 0.0 on pci1 pci2: on pcib2 mpfe0: mem 0xa4000000-0xa40fffff,0xa0000000-0xa3ffffff irq 19 at device 0.0 on pci2 mpfe_adcr_shadow_alloc: allocated idx: 0 pcib3: iomem 0xfef0b000-0xfef0bfff,0xe8000000-0xebffffff,0xec200000-0xec2fffff irq 43 on ocpbus0 pci3: on pcib3 pcib4: at device 0.0 on pci3 pci4: on pcib4 mpfe1: mem 0xb4000000-0xb40fffff,0xb0000000-0xb3ffffff irq 18 at device 0.0 on pci4 mpfe_adcr_shadow_alloc: allocated idx: 1 idma0: iomem 0xfef21000-0xfef21300 irq 36 on ocpbus0 Initializing product: 41 .. Loading Redundant LT driver Registered AMT tunnel Encap with UDP Tunnel! ###PCB Group initialized for udppcbgroup ###PCB Group initialized for tcppcbgroup Kernel thread "wkupdaemon" (pid 44) exited prematurely. da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C) Trying to mount root from ufs:/dev/da0s2a Attaching /packages/junos via /dev/mdctl... Mounted junos-ex package on /dev/md0... stty: stdin isn't a terminal Verified manifest signed by PackageProductionEc_2018 method ECDSA256+SHA256 Verified jboot signed by PackageProductionEc_2018 method ECDSA256+SHA256 Verified junos-ex-15.1R7.9 signed by PackageProductionEc_2018 method ECDSA256+SHA256 Mounted fips-mode-powerpc package on /dev/md2... Verified manifest signed by PackageProductionEc_2018 method ECDSA256+SHA256 Verified fips-mode-powerpc-15.1R7.9 signed by PackageProductionEc_2018 method ECDSA256+SHA256 Mounted jcrypto-ex package on /dev/md4... Verified manifest signed by PackageProductionEc_2018 method ECDSA256+SHA256 Verified jcrypto-ex-15.1R7.9 signed by PackageProductionEc_2018 method ECDSA256+SHA256 Mounted jdocs-ex package on /dev/md6... Verified manifest signed by PackageProductionEc_2018 method ECDSA256+SHA256 Verified jdocs-ex-15.1R7.9 signed by PackageProductionEc_2018 method ECDSA256+SHA256 Mounted junos-ex-4200 package on /dev/md8... Verified manifest signed by PackageProductionEc_2018 method ECDSA256+SHA256 Verified junos-ex-4200-15.1R7.9 signed by PackageProductionEc_2018 method ECDSA256+SHA256 Mounted jweb-ex package on /dev/md10... Verified manifest signed by PackageProductionEc_2018 method ECDSA256+SHA256 Verified jweb-ex-15.1R7.9 signed by PackageProductionEc_2018 method ECDSA256+SHA256 Executing /packages/mnt/jweb-ex-15.1R7.9/mount.post.. Error execution /packages/mnt/jweb-ex-15.1R7.9/mount.post: path /var/jail does not exist Automatic reboot in progress... Media check on da0 on ex platforms ** /dev/da0s2a FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 12342 free (22 frags, 1540 blocks, 0.0% fragmentation) ** Last Mounted on /instrootmnt/var ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 431 files, 1137 used, 61765 free (173 frags, 7699 blocks, 0.3% fragmentation) Computing slice and partition sizes for /dev/da0 ... checking for core dump... savecore: Reboot reason(s): 0x2: watchdog No dump exists ** Last Mounted on /instrootmnt/var/tmp ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 5 files, 5 used, 188849 free (33 frags, 23602 blocks, 0.0% fragmentation) ** Last Mounted on /instrootmnt/config ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 25 files, 32 used, 31574 free (38 frags, 3942 blocks, 0.1% fragmentation) /: update error: blocks 0 files 1 mkdir: /mfs/var/sdb: No such file or directory mkdir: /mfs/var/sdb: No such file or directory Creating initial configuration...mgd: Running FIPS Self-tests veriexec: no signatures for device. file='/sbin/kats/cannot-exec' fsid=74 fileid=51404 gen=1 uid=0 pid=561 mgd: FIPS Self-tests Skipped mgd: Running FIPS Self-tests veriexec: no signatures for device. file='/sbin/kats/cannot-exec' fsid=74 fileid=51404 gen=1 uid=0 pid=624 mgd: FIPS Self-tests Skipped mgd: commit complete Setting initial options: debugger_on_panic=NO debugger_on_break=NO. Starting optional daemons: . Doing initial network setup: . Initial interface configuration: additional daemons:. Additional routing options:kern.module_path: /boot//kernel;Loading the CHMIC module Loading the EX-series platform NETPFE moduletype;/modules/ifpfe_drv;/modules/platform;/modules; kld netpfe drv: ifpfed_chmic ifpfed_ml_cmn ifpfed_svcskld platform: ex_ifpfe if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere grat_cryptosoft0: on nexus0 arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1 IPsec: Initialized Security Association Processing. ipsec kld kats kldkldload: can't load kats.ko: File exists . Doing additional network setup:. Starting final network daemons:. starting local daemons:set cores for group access . Boot media /dev/da0 has dual root support WARNING: JUNOS versions running on dual partitions are not same ** /dev/da0s1a FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 17051 free (11 frags, 2130 blocks, 0.0% fragmentation) setting ldconfig path: /usr/lib /opt/lib starting standard daemons: cron. Local package initialization:. Initialize /var subdirs Tue Sep 11 06:15:33 UTC 2018 Amnesiac (ttyu0) Broadcast Message from root@ (no tty) at 6:16 UTC... ALERT:Auto image Upgrade will start. This can terminate config CLI sess ion(s). Modified configuration will be lost. To stop Auto-image, in CLI do the following: 'edit; delete chassis auto-image-upgrade; commit'. root@:RE:0% cli {master:0} root> show version fpc0: -------------------------------------------------------------------------- Model: ex4200-24t Junos: 15.1R7.9 JUNOS EX Software Suite [15.1R7.9] JUNOS FIPS mode utilities [15.1R7.9] JUNOS Crypto Software Suite [15.1R7.9] JUNOS Online Documentation [15.1R7.9] JUNOS EX 4200 Software Suite [15.1R7.9] JUNOS Web Management Platform Package [15.1R7.9] {master:0} root> show system snapshot media internal fpc0: -------------------------------------------------------------------------- Information for snapshot on internal (/dev/da0s1a) (backup) Creation date: Nov 8 21:26:11 2019 JUNOS version on snapshot: jdocs-ex: 14.1X53-D52.4 junos : ex-14.1X53-D52.4 junos-ex-4200: 14.1X53-D52.4 jweb-ex: 14.1X53-D52.4 Information for snapshot on internal (/dev/da0s2a) (primary) Creation date: Sep 11 06:12:40 2018 JUNOS version on snapshot: jcrypto-ex: 15.1R7.9 jdocs-ex: 15.1R7.9 junos : ex-15.1R7.9 junos-ex-4200: 15.1R7.9 jweb-ex: 15.1R7.9 {master:0} root> request system snapshot slice alternate fpc0: -------------------------------------------------------------------------- Formatting alternate root (/dev/da0s1a)... Copying '/dev/da0s2a' to '/dev/da0s1a' .. (this may take a few minutes) The following filesystems were archived: / {master:0} root> show system snapshot media internal fpc0: -------------------------------------------------------------------------- Information for snapshot on internal (/dev/da0s1a) (backup) Creation date: Sep 11 06:23:00 2018 JUNOS version on snapshot: jcrypto-ex: 15.1R7.9 jdocs-ex: 15.1R7.9 junos : ex-15.1R7.9 junos-ex-4200: 15.1R7.9 jweb-ex: 15.1R7.9 Information for snapshot on internal (/dev/da0s2a) (primary) Creation date: Sep 11 06:12:40 2018 JUNOS version on snapshot: jcrypto-ex: 15.1R7.9 jdocs-ex: 15.1R7.9 junos : ex-15.1R7.9 junos-ex-4200: 15.1R7.9 jweb-ex: 15.1R7.9 {master:0} root> show system storage fpc0: -------------------------------------------------------------------------- Filesystem Size Used Avail Capacity Mounted on /dev/da0s2a 184M 160M 9.4M 94% / devfs 1.0K 1.0K 0B 100% /dev /dev/md0 282M 282M 0B 100% /packages/mnt/junos /dev/md1 6.8M 2.1M 4.1M 33% /packages/mfs-fips-mode-powerpc /dev/md2 5.4M 5.4M 0B 100% /packages/mnt/fips-mode-powerpc-15.1R7.9 /dev/md3 6.7M 2.0M 4.1M 33% /packages/mfs-jcrypto-ex /dev/md4 5.3M 5.3M 0B 100% /packages/mnt/jcrypto-ex-15.1R7.9 /dev/md5 8.7M 4.1M 3.9M 51% /packages/mfs-jdocs-ex /dev/md6 12M 12M 0B 100% /packages/mnt/jdocs-ex-15.1R7.9 /dev/md7 45M 40M 1.4M 97% /packages/mfs-junos-ex-4200 /dev/md8 83M 83M 0B 100% /packages/mnt/junos-ex-4200-15.1R7.9 /dev/md9 14M 9.1M 3.5M 72% /packages/mfs-jweb-ex /dev/md10 26M 26M 0B 100% /packages/mnt/jweb-ex-15.1R7.9 /dev/da0s3e 123M 1.7M 111M 2% /var /dev/md11 252M 12K 232M 0% /tmp /dev/da0s3d 369M 17M 323M 5% /var/tmp /dev/da0s4d 62M 68K 57M 0% /config /dev/md12 118M 20M 89M 18% /var/rundb procfs 4.0K 4.0K 0B 100% /proc /var/jail/etc 123M 1.7M 111M 2% /packages/mnt/jweb-ex-15.1R7.9/jail/var/etc /var/jail/run 123M 1.7M 111M 2% /packages/mnt/jweb-ex-15.1R7.9/jail/var/run /var/jail/tmp 123M 1.7M 111M 2% /packages/mnt/jweb-ex-15.1R7.9/jail/var/tmp /var/tmp 369M 17M 323M 5% /packages/mnt/jweb-ex-15.1R7.9/jail/var/tmp/uploads devfs 1.0K 1.0K 0B 100% /packages/mnt/jweb-ex-15.1R7.9/jail/dev /var/jail/jweb-app 123M 1.7M 111M 2% /packages/mnt/jweb-ex-15.1R7.9/jail/var/jweb-app /dev/md13 6.8M 2.1M 4.1M 33% /packages/mfs-fips-mode-powerpc /dev/md14 6.7M 2.0M 4.1M 33% /packages/mfs-jcrypto-ex /dev/md15 8.7M 4.1M 3.9M 51% /packages/mfs-jdocs-ex /dev/md16 45M 40M 1.4M 97% /packages/mfs-junos-ex-4200 /dev/md17 14M 9.1M 3.5M 72% /packages/mfs-jweb-ex {master:0} root>