==== Commands ====

  * root@% **cli**
    * root> **request system zeroize**

  * root> edit
    * Entering configuration mode

[edit]
root# delete 
This will delete the entire configuration
Delete everything under this level? [yes,no] (no) yes 

[edit]
root# 

  * [edit]
root# set system host-name LabFW2  

  * [edit]
root# set system root-authentication plain-text-password    
New password:
Retype new password:

  * root# set system login user tim authentication plain-text-password    
New password:
Retype new password:

  * [edit]
root# set system login user timm class super-user 

  * [edit]
root# rename system login user timm to user tim

  * [edit]
root# set system login user tim full-name "Tim Panther"

  * [edit]
root# set system host-name LLabFW22    

[edit]
root# delete system host-name LLabFW22 

[edit]
root# set system host-name LabFW2

  * [edit]
root# show 
## Last changed: 2016-09-26 02:10:34 UTC
version 12.1X46-D40.2;
system {
    host-name LabFW2;
    root-authentication {
        encrypted-password "$1$SVE6qJyk$yKV8ZoWhG40Sb/IS/va.60"; ## SECRET-DATA
    }
    login {
        user tim {
            full-name "Tim Panther";
            class super-user;
            authentication {
                encrypted-password "$1$b1ak3jfX$CC62JkTQSpT1KojlKTKYt."; ## SECRET-DATA
            }
        }
    }
}


  * [edit]
root# show | display set 
set version 12.1X46-D40.2
set system host-name LabFW2
set system root-authentication encrypted-password "$1$SVE6qJyk$yKV8ZoWhG40Sb/IS/va.60"
set system login user tim full-name "Tim Panther"
set system login user tim class super-user
set system login user tim authentication encrypted-password "$1$b1ak3jfX$CC62JkTQSpT1KojlKTKYt."

  * [edit]
root# commit check 
configuration check succeeds

[edit]
root# commit comment "Initial setup for lab"  
commit complete

[edit]
root@LabFW2# quit 
Exiting configuration mode

root@LabFW2> show system commit 
0   2016-09-26 02:17:42 UTC by root via cli
    Initial setup for lab
1   2016-09-26 00:59:12 UTC by root via other

root@LabFW2> 

  * Juniper default passwords:
    * juniper1
    * juniper123
    * cisco

  * [edit]
root@LabJR13# edit protocols bgp   

[edit protocols bgp]
root@LabJR13# top 

[edit]
root@LabJR13# edit protocols bgp 

[edit protocols bgp]
root@LabJR13# up 

[edit protocols]
root@LabJR13# up 

[edit]
root@LabJR13# edit protocols bgp 

[edit protocols bgp]
root@LabJR13# up 2 

[edit]
root@LabJR13# 

  * root@LabJR13> request system reboot 

  * root@LabFW1> request system power-off

  * root@LabJR13> request system power-off message "Turning off in 10 hours"

==== Disable Security for firewalls ====
This is needed to make the firewalls' interfaces into router interfaces.

  * [edit]
root@LabFW1-J1# show | compare 
[edit]
  security {
      forwarding-options {
          family {
              inet6 {
                  mode packet-based;
              }
              mpls {
                  mode packet-based;
              }
              iso {
                  mode packet-based;
              }
          }
      }
  }

Or you can type:
  * set security forwarding-options family inet6 mode packet-based
  * set security forwarding-options family mpls mode packet-based
  * set security forwarding-options family iso mode packet-based


==== Edit Interfaces ====
  
  * [edit]
  interfaces {
      ge-0/0/0 {
          unit 0 {
              family inet {
                  address 192.168.12.1/24;
              }
          }
      }
      fe-0/0/2 {
          unit 0 {
              family inet {
                  address 192.168.13.1/24;
              }
          }
      }
      fe-0/0/7 {
          unit 0 {
              family inet {
                  address 192.168.14.1/24;
  * or you can type:
    * set interfaces fe-0/0/7 unit 0 family inet address 192.168.14.1/24