Tim's Technology Journey Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====Redistribution from RIP to EIGRP to OSPF====
<code>router eigrp
    redistribute rip metric x x x x x route-map INE ## Add a tag of 999 to routes ##
!
route-map INE
    match certain routes
    set tag 999
!
route ospf 1
    redistribute EIGRP 100 route-map INE ## Only match ingress routes with a tag of 999 ##
route-map INE
    match tag 999</code>
 
  * Have to set the metric for routes. Simply typing **redistribute rip** will not work.
  * With no metric values set, the values are set to infinity.

  * There are ways to set metrics for routes being redistributed into EIGRP:
    * Using the **default-metric** bw delay reliability load mtu EIGRP subcommand.
    * Using the **metric** bw delay reliability load mtu parametes on the **redistribute** command.
    * Using the **route-map** parameter on the **redistribute** command, matching routes and setting metric components.

<code>router eigrp 100
    redistribute ospf 1 route-map INE
    network 20.19.20.0 0.0.0.255
    no auto-summary
!
router ospf 1
    router-id 0.0.0.19
!
access-list 1 permit 188.188.188.0 0.0.0.255
!
route-map INE permit 10  ## 10 is the sequence number ##
    match ip address 1 ## ACL number ##
    set metric 1000 100 255 1 1500
!
route-map INE permit 20 ## match all other cases ##
    set metric 100000 50 255 1 1500</code>

Tim's Technology Journey Wiki

User Tools

Site Tools

Page Tools