Tim's Technology Journey Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

=====Lab 1: Initial Configuration====
{{ :cisco:bgp:ios-xe_labs:lab_1_ios-xe_initial_bgp_config.png?250|}}
  - On Router 1:
    - Hostname: Router1
    - Loopback 0: 10.1.1.1/24
    - G1: 192.168.1.2/30 connects to G1 on Router2
  - On Router 2:
    - Hostname: Router2
    - Loopback 0: 172.17.1.1/24
    - G1: 192.168.1.1/30 connects to G1 on Router1
  - Ping should work from G1 to G1 on each router.

<code>
RouterA#ping 192.168.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 13/18/23 ms
</code>
<code>
RouterB#ping 192.168.1.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 12/13/15 ms
</code>

[[http://www.dergenterprises.com/wiki/doku.php?id=cisco:bgp:ios-xe_labs:lab1:lab1_answer|Lab 1: Answer]]\\ 
[[http://www.dergenterprises.com/wiki/doku.php?id=cisco:bgp:ios-xe_labs|IOS-XE Labs]]\\

Tim's Technology Journey Wiki

User Tools

Site Tools

Page Tools