Tim's Technology Gauntlet Wiki

User Tools

Site Tools

Trace:
cisco:labs:00400

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
cisco:labs:00400 [2025/12/27 04:55] – removed Namecisco:labs:00400 [2025/12/27 05:19] (current) – Name
Line 1: Line 1:
 +====== Lab 00400 OSPFv3 2 Routers, IOS-XE ======
  
 +{{ :cisco:labs:00400.jpg?700 |}}
 +
 +  - Complete [[cisco:labs:00000|Lab 00000 Initial Config 2 Routers, IOS-XE]]\\ 
 +
 +===== Router 1 =====
 +<code>en
 +conf t
 +interface GigabitEthernet1
 + ip ospf 1 area 0
 +!
 +interface Loopback0
 + ip ospf 1 area 0</code>
 +
 +===== Router 2 =====
 +<code>en
 +conf t
 +interface GigabitEthernet1
 + ip ospf 1 area 0
 +!
 +interface Loopback0
 + ip ospf 1 area 0</code>
 +
 +
 +===== Verification =====
 +<code>r1#show ip route | b Gate
 +Gateway of last resort is not set
 +
 +      1.0.0.0/32 is subnetted, 1 subnets
 +C        1.1.1.1 is directly connected, Loopback0
 +      2.0.0.0/32 is subnetted, 1 subnets
 +O        2.2.2.2 [110/2] via 12.0.0.2, 00:01:42, GigabitEthernet1
 +      12.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
 +C        12.0.0.0/24 is directly connected, GigabitEthernet1
 +L        12.0.0.1/32 is directly connected, GigabitEthernet1</code>
 +
 +<code>r1#show ip ospf nei
 +
 +Neighbor ID     Pri   State           Dead Time   Address         Interface
 +2.2.2.2           1   FULL/DR         00:00:36    12.0.0.2        GigabitEthernet1</code>
 +
 +<code>r1#ping 2.2.2.2
 +Type escape sequence to abort.
 +Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds:
 +!!!!!
 +Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/3 ms</code>
 +
 +<code>r2#show ip route | b Gate
 +Gateway of last resort is not set
 +
 +      1.0.0.0/32 is subnetted, 1 subnets
 +O        1.1.1.1 [110/2] via 12.0.0.1, 00:03:30, GigabitEthernet1
 +      2.0.0.0/32 is subnetted, 1 subnets
 +C        2.2.2.2 is directly connected, Loopback0
 +      12.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
 +C        12.0.0.0/24 is directly connected, GigabitEthernet1
 +L        12.0.0.2/32 is directly connected, GigabitEthernet1</code>
 +
 +<code>r2#show ip ospf nei
 +
 +Neighbor ID     Pri   State           Dead Time   Address         Interface
 +1.1.1.1           1   FULL/BDR        00:00:38    12.0.0.1        GigabitEthernet1</code>
 +
 +<code>r2#ping 1.1.1.1
 +Type escape sequence to abort.
 +Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:
 +!!!!!
 +Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms</code>
 +
 +===== TCL Script =====
 +<code>r1#tclsh
 +r1(tcl)#foreach ipaddr {
 ++>(tcl)#12.0.0.2
 ++>(tcl)#2.2.2.2
 ++>(tcl)#} { ping $ipaddr }
 +Type escape sequence to abort.
 +Sending 5, 100-byte ICMP Echos to 12.0.0.2, timeout is 2 seconds:
 +!!!!!
 +Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
 +Type escape sequence to abort.
 +Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds:
 +!!!!!
 +Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
 +r1(tcl)#tclquit</code>
 +
 +<code>r2#tclsh
 +r2(tcl)#foreach ipaddr {
 ++>(tcl)#12.0.0.1
 ++>(tcl)#1.1.1.1
 ++>(tcl)#} { ping $ipaddr }
 +Type escape sequence to abort.
 +Sending 5, 100-byte ICMP Echos to 12.0.0.1, timeout is 2 seconds:
 +!!!!!
 +Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/2 ms
 +Type escape sequence to abort.
 +Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:
 +!!!!!
 +Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
 +r2(tcl)#tclquit</code>
cisco/labs/00400.1766811317.txt.gz · Last modified: by Name

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki