User Tools
cisco:labs:00300
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| cisco:labs:00300 [2025/12/26 06:21] – Name | cisco:labs:00300 [2025/12/26 17:51] (current) – Name | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ====== Lab 00300 OSPF 2 Routers, IOS-XE ====== | + | ====== Lab 00300 OSPFv2 |
| {{ : | {{ : | ||
| Line 8: | Line 8: | ||
| < | < | ||
| conf t | conf t | ||
| - | router | + | router |
| - | | + | |
| - | | + | |
| ===== Router 2 ===== | ===== Router 2 ===== | ||
| < | < | ||
| conf t | conf t | ||
| - | router | + | router |
| - | | + | |
| - | | + | |
| ===== Verification ===== | ===== Verification ===== | ||
| - | < | + | < |
| Gateway of last resort is not set | Gateway of last resort is not set | ||
| 1.0.0.0/32 is subnetted, 1 subnets | 1.0.0.0/32 is subnetted, 1 subnets | ||
| C 1.1.1.1 is directly connected, Loopback0 | C 1.1.1.1 is directly connected, Loopback0 | ||
| - | R 2.0.0.0/8 [120/1] via 12.0.0.2, 00:00:27, GigabitEthernet1 | + | |
| + | O 2.2.2.2 | ||
| 12.0.0.0/8 is variably subnetted, 2 subnets, 2 masks | 12.0.0.0/8 is variably subnetted, 2 subnets, 2 masks | ||
| C 12.0.0.0/24 is directly connected, GigabitEthernet1 | C 12.0.0.0/24 is directly connected, GigabitEthernet1 | ||
| L 12.0.0.1/32 is directly connected, GigabitEthernet1</ | L 12.0.0.1/32 is directly connected, GigabitEthernet1</ | ||
| + | |||
| + | < | ||
| + | |||
| + | Neighbor ID | ||
| + | 2.2.2.2 | ||
| < | < | ||
| Line 40: | Line 46: | ||
| Gateway of last resort is not set | Gateway of last resort is not set | ||
| - | R 1.0.0.0/8 [120/1] via 12.0.0.1, 00:00:24, GigabitEthernet1 | + | |
| + | O 1.1.1.1 | ||
| 2.0.0.0/32 is subnetted, 1 subnets | 2.0.0.0/32 is subnetted, 1 subnets | ||
| C 2.2.2.2 is directly connected, Loopback0 | C 2.2.2.2 is directly connected, Loopback0 | ||
| Line 46: | Line 53: | ||
| C 12.0.0.0/24 is directly connected, GigabitEthernet1 | C 12.0.0.0/24 is directly connected, GigabitEthernet1 | ||
| L 12.0.0.2/32 is directly connected, GigabitEthernet1</ | L 12.0.0.2/32 is directly connected, GigabitEthernet1</ | ||
| + | |||
| + | < | ||
| + | |||
| + | Neighbor ID | ||
| + | 1.1.1.1 | ||
| < | < | ||
| Line 52: | Line 64: | ||
| !!!!! | !!!!! | ||
| Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms</ | Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms</ | ||
| + | |||
| + | ===== TCL Script ===== | ||
| + | < | ||
| + | r1(tcl)# | ||
| + | +> | ||
| + | +> | ||
| + | +> | ||
| + | Type escape sequence to abort. | ||
| + | Sending 5, 100-byte ICMP Echos to 12.0.0.2, timeout is 2 seconds: | ||
| + | !!!!! | ||
| + | Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms | ||
| + | Type escape sequence to abort. | ||
| + | Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds: | ||
| + | !!!!! | ||
| + | Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms | ||
| + | r1(tcl)# | ||
| + | |||
| + | < | ||
| + | r2(tcl)# | ||
| + | +> | ||
| + | +> | ||
| + | +> | ||
| + | Type escape sequence to abort. | ||
| + | Sending 5, 100-byte ICMP Echos to 12.0.0.1, timeout is 2 seconds: | ||
| + | !!!!! | ||
| + | Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/2 ms | ||
| + | Type escape sequence to abort. | ||
| + | Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds: | ||
| + | !!!!! | ||
| + | Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms | ||
| + | r2(tcl)# | ||
| + | |||
cisco/labs/00300.1766730116.txt.gz · Last modified: by Name
Page Tools
