Differences

This shows you the differences between two versions of the page.

--- cisco:labs:00000 [2025/12/23 03:57] – Name
+++ cisco:labs:00000 [2025/12/26 17:19] (current) – Name
@@ Line 1: / Line 1: @@
-====== Lab 00000 - Initial Config 2 Routers, IOS-XE ======
+====== Lab 00000 Initial Config 2 Routers, IOS-XE ======
-{{ :cisco:labs:00000.jpg?500 |}}
+{{ :cisco:labs:00000.jpg?700 |}}
 ===== Router 1 =====
@@ Line 58: / Line 58: @@
 do wr
 </code>
+===== Verification =====
+<code>r1#ping 12.0.0.2
+Type escape sequence to abort.
+Sending 5, 100-byte ICMP Echos to 12.0.0.2, timeout is 2 seconds:
+.!!!!
+Success rate is 80 percent (4/5), round-trip min/avg/max = 1/1/3 ms</code>
+<code>r1#ping 2.2.2.2
+Type escape sequence to abort.
+Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds:
+.....
+Success rate is 0 percent (0/5)</code>
+This will be fixed on Lab 00100.
+===== TCL Script =====
+<code>r1#tclsh
+r1(tcl)#foreach ipaddr {
++>(tcl)#12.0.0.2
++>(tcl)#} { ping $ipaddr}
+Type escape sequence to abort.
+Sending 5, 100-byte ICMP Echos to 12.0.0.2, timeout is 2 seconds:
+.!!!!
+Success rate is 80 percent (4/5), round-trip min/avg/max = 1/1/2 ms
+r1(tcl)#tclquit</code>
+<code>r2#tclsh
+r2(tcl)#foreach ipaddr {
++>(tcl)#12.0.0.1
++>(tcl)#} { ping $ipaddr}
+Type escape sequence to abort.
+Sending 5, 100-byte ICMP Echos to 12.0.0.1, timeout is 2 seconds:
+!!!!!
+Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/2 ms
+r2(tcl)#tclquit</code>

Tim's Technology Gauntlet Wiki