Tim's Technology Journey Wiki

User Tools

Site Tools

Trace: • lab10-1
cisco:books:ccie_bridging_the_gap:ch10:lab10-1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
cisco:books:ccie_bridging_the_gap:ch10:lab10-1 [2025/08/24 12:53] – Namecisco:books:ccie_bridging_the_gap:ch10:lab10-1 [2025/08/26 15:09] (current) – 97.85.225.56
Line 1: Line 1:
 =====Cisco Books - CCIE Bridging the Gap: Chapter 10 - Lab 10-1===== =====Cisco Books - CCIE Bridging the Gap: Chapter 10 - Lab 10-1=====
-====Parameters==== +=====Parameters===== 
 This lab has the following parameters: This lab has the following parameters:
   * RIPv2 as the underlay, to provide a route between loopbacks.   * RIPv2 as the underlay, to provide a route between loopbacks.
Line 10: Line 10:
 {{:cisco:books:ccie_bridging_the_gap:ch10:lab_10-1.jpg?300 |}} {{:cisco:books:ccie_bridging_the_gap:ch10:lab_10-1.jpg?300 |}}
  
-====Initial Configurations====+=====Initial Configurations=====
 __r1__ __r1__
-<code>hostname r1+<code>en 
 +conf t 
 +! 
 +hostname r1
 interface Loopback0 interface Loopback0
  ip address 1.1.1.1 255.0.0.0  ip address 1.1.1.1 255.0.0.0
Line 21: Line 24:
 interface GigabitEthernet0/0 interface GigabitEthernet0/0
  ip address 10.1.1.1 255.255.255.0  ip address 10.1.1.1 255.255.255.0
- no shut</code>+ no shut 
 +! 
 +line con 0 
 +logg syn 
 +exec-timeout 0 0 
 +! 
 +end 
 +wr</code>
 __r2__ __r2__
-<code>hostname r2+<code>en 
 +conf t 
 +! 
 +hostname r2
 interface Loopback0 interface Loopback0
  ip address 2.2.2.2 255.0.0.0  ip address 2.2.2.2 255.0.0.0
Line 32: Line 45:
 interface GigabitEthernet0/0 interface GigabitEthernet0/0
  ip address 10.1.1.2 255.255.255.0  ip address 10.1.1.2 255.255.255.0
- no shut</code>+ no shut 
 +! 
 +line con 0 
 +logg syn 
 +exec-timeout 0 0 
 +! 
 +end 
 +wr</code>
 __r3__ __r3__
-<code>hostname r3+<code>en 
 +conf t 
 +! 
 +hostname r3
 interface Loopback0 interface Loopback0
  ip address 3.3.3.3 255.0.0.0  ip address 3.3.3.3 255.0.0.0
Line 43: Line 66:
 interface GigabitEthernet0/0 interface GigabitEthernet0/0
  ip address 10.1.1.3 255.255.255.0  ip address 10.1.1.3 255.255.255.0
- no shut</code>+ no shut 
 +! 
 +line con 0 
 +logg syn 
 +exec-timeout 0 0 
 +! 
 +end 
 +wr</code>
 __r4__ __r4__
-<code>hostname r4+<code>en 
 +conf t 
 +! 
 +hostname r4
 interface Loopback0 interface Loopback0
  ip address 4.4.4.4 255.0.0.0  ip address 4.4.4.4 255.0.0.0
Line 54: Line 87:
 interface GigabitEthernet0/0 interface GigabitEthernet0/0
  ip address 10.1.1.4 255.255.255.0  ip address 10.1.1.4 255.255.255.0
- no shut</code>+ no shut 
 +! 
 +line con 0 
 +logg syn 
 +exec-timeout 0 0 
 +! 
 +end 
 +wr</code>
  
-====End of Lab 10-1 Configurations====+=====End of Lab 10-1 Configurations=====
  
 __r1__ __r1__
-<code>hostname r1 +<code>router rip
-interface Loopback0 +
- ip address 1.1.1.1 255.0.0.0 +
-! +
-interface Loopback1 +
- ip address 192.168.1.1 255.255.255.0 +
-! +
-interface GigabitEthernet0/0 +
- ip address 10.1.1.1 255.255.255.0 +
- no shut +
-! +
-router rip+
  version 2  version 2
  network 1.0.0.0  network 1.0.0.0
Line 87: Line 116:
  neighbor 4.4.4.4 peer-group tst</code>  neighbor 4.4.4.4 peer-group tst</code>
 __r2__ __r2__
-<code>hostname r2 +<code>router rip
-interface Loopback0 +
- ip address 2.2.2.2 255.0.0.0 +
-! +
-interface Loopback1 +
- ip address 192.168.2.2 255.255.255.0 +
-! +
-interface GigabitEthernet0/0 +
- ip address 10.1.1.2 255.255.255.0 +
- no shut +
-! +
-router rip+
  version 2  version 2
  network 2.0.0.0  network 2.0.0.0
Line 115: Line 133:
  neighbor 4.4.4.4 peer-group tst</code>  neighbor 4.4.4.4 peer-group tst</code>
 __r3__ __r3__
-<code>hostname r3 +<code>router rip
-interface Loopback0 +
- ip address 3.3.3.3 255.0.0.0 +
-! +
-interface Loopback1 +
- ip address 192.168.3.3 255.255.255.0 +
-! +
-interface GigabitEthernet0/0 +
- ip address 10.1.1.3 255.255.255.0 +
- no shut +
-! +
-router rip+
  version 2  version 2
  network 3.0.0.0  network 3.0.0.0
Line 143: Line 150:
  neighbor 4.4.4.4 peer-group tst</code>  neighbor 4.4.4.4 peer-group tst</code>
 __r4__ __r4__
-<code>hostname r4 +<code>router rip
-interface Loopback0 +
- ip address 4.4.4.4 255.0.0.0 +
-! +
-interface Loopback1 +
- ip address 192.168.4.4 255.255.255.0 +
-! +
-interface GigabitEthernet0/0 +
- ip address 10.1.1.4 255.255.255.0 +
- no shut +
-! +
-router rip+
  version 2  version 2
  network 4.0.0.0  network 4.0.0.0
Line 171: Line 167:
  neighbor 3.3.3.3 peer-group tst</code>  neighbor 3.3.3.3 peer-group tst</code>
  
-====Verification on r1====+=====Verification on r1=====
 <code>r1#show ip bgp summary <code>r1#show ip bgp summary
 BGP router identifier 1.1.1.1, local AS number 100 BGP router identifier 1.1.1.1, local AS number 100
Line 194: Line 190:
   Update messages formatted 0, replicated 0   Update messages formatted 0, replicated 0
   Number of NLRIs in the update sent: max 0, min 0</code>   Number of NLRIs in the update sent: max 0, min 0</code>
 +  
 +=====Backlinks=====
 +[[:cisco|Cisco]]\\ 
 +[[:cisco:books|Cisco Books]]\\ 
 +[[:cisco:books:ccie_bridging_the_gap|CCIE Bridging the Gap]]\\ 
 +[[:cisco:books:ccie_bridging_the_gap:ch10|CCIE Bridging the Gap - Chapter 10]]\\ 
 +
  
cisco/books/ccie_bridging_the_gap/ch10/lab10-1.1756040034.txt.gz · Last modified: by Name

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki